threaded holeの例文

• 1 . small bolts that go up through threaded holes in the strap;
• Two threaded holes are provided in order to lock the coupling in position.
• :Your TV's Flat Display Mounting Interface has M4 threaded holes.
• The M3 threaded holes are often found on optical disc drives and floppy drives.
• You attach the remote cable to the threaded hole on top of the shutter button.
• Using cage nuts provides several benefits over threaded holes.
• Instead they are screwed into threaded holes.
• The plastic now has a threaded hole that will accept a new screw of the same size.
• A turnbuckle is a steel sleeve with a central slot and a threaded hole at either end.
• A soft-covered blade with a threaded hole in the center into which one screws a short pole.
• There was a bolt inside of the threaded hole that allowed for the entire mechanism to be raised and lowered.
• Rods curved down along the kettle and connected the counter hoop to a threaded hole at the bottom of the bowl.
• :If it's like my MINI ( BMW ), opening the cover reveals a threaded hole for screwing in a tow hook.
• Second, if a screw is over-tightened, the nut can be replaced, unlike a pre-threaded hole, where a hole with stripped threads becomes unusable.
• Alternatively, some threaded shackles are provided with a hole through the threaded end of the pin beyond where it emerges from the threaded hole.
• The workpiece is then clamped to the faceplate, typically using t-nuts in slots in the faceplate, or less commonly threaded holes in the faceplate itself.
• I tried cutting the end off one of these with a hack saw but the threads got all damaged and they would not screw into the existing threaded holes.
• But, he added, the custom stock made the gun much more identifiable, and the sheriff's list showed it with a telescopic sight that requires special mounting in threaded holes.
• The screw is mated with a partially threaded hole at the rear of the weapon's chamber : where the screw has threads the hole has none, and vice versa.
• A screwdriver is inserted into the slot at the end of the cross dowel and the dowel is rotated so that its threaded hole aligns with the bolt hole.